ซาวเดอร์ HONDEX HE-881จอ8.4"LCDไม่เอาหัวซาวเดอร์หัก4,000 เหลือ30,000

  OPERATION  MANUAL

SOUNDER HONDEX HE-881

INTRODUCTION

Thank you very much for purchasing our product.

Please be sure to read this operating manual carefully and understand the contents before the actual operation in order to keep your safety.

Please store this manual safely at the convenient place so that you can read it when needed.

Please pass this manual to new owner when you resell or give this unit to someone else.

We are not responsible for any physical injuries and property damages under product liability (PL) low by wrong usage or any other operations not described in this manual.

DEFINITION  OF  SYMBOL  MARK (CAUTION  FOR  SAFETY)

DANGER : Incur the accident  resulting in the death or serious injuries unless you  keep the descriptions.

WARNING : Be in danger of incurring the accident resulting in the death or serious wound  unless you   keep the descriptions.

CUATION : Be in danger or incurring the slight wound to human or damage to other physical property unless you the descriptions.

Do not reproduce a part or all of contents described in the manual.

Please understand that the unit may differ from the contents   described in the manual due to the specification changes etc.

Please inform us if you see any errors and / or unclear description in this manual.

CAUTION ON SAFETY (BE SURE TO READ THIS)

This section explains the important cautions in order to prevent the users and surrounding people from physical injuries and property damages.

No one besides authorized personnel should disassemble or modify the unit.

1.       CAUTION ON SAFETY

DANGER

-          High voltage is used for the unit inside. NO one besides authorized personal should disassemble or modify the unit. If not followed, it may result in electronic shock.

*Please be sure to consult with the local dealer for any repairs.

WARNING

-          Install the unit firmly. If not, If may cause the accidents such as human injuries.

-          Do not use the information display on the screen for navigation. It causes the marine accidents and incidents.

*Be sure to use the official marine charts for navigation judgement.

-          Do not operate the unit while piloting the vessel. It causes the marine accidents and incidents.

* Be sure to confirm the surrounding safety before  the usage.

-          Do not put the power on in the presence of flammable materials. If causes the fire.  

-          Do not use power supply besides the specified one. It causes the firing and heading.

-          Do not disassemble and modify the unit. It causes the firing, electronic shock and injury.

-          Do not operate the unit with wet hands. It cause the electronic shock and damage.

-Disconnect the power cable in the case of problem, smoke, and fire. It causes the firing and electronic shock.

Be sure to contact the local shop or customer support.

CAUTION

-          Do not install the unit where rain or spray dashes hit directly. It causes the firing and electronic shock.

-          Do not install the unit at heated places. It causes the firing from the increase of internal, injury, and electronic shock.

-          Use the ear thing. Noise influence can be prevented by firm earthing.

-          Away from directing sun light. It causes the difficulty of future vision and heat problem.

2.       HANDLING OF CABLE

WARNING

-          Be sure to the specified power supply cable. It causes firing and heating.

-          Do not leave the power plug after its removal. It causes firing and heading if the plug gets wet.

-          Be sure to wire the cables for safety pilot. The improper wiring causes the accident.

                        *Do not put to the heavy object on cables or bend cables excessively.

-          Do not disassemble or modify the cables. It causes firing, heating, or electronic shock.

-          Do not use damage cables. It causes firing or electronic shock.

CAUTION

-          Do not pull out the cable when disconnecting the plug. The cable damage causes firing and electronic shock.

*Be  sure to hold and pull the plug itself for the removal.

-          Do not put any pressure on cables when installing the unit. It causes line cut and shortage.

3.       HANDLING OF TRANSDUCER AND WATER TEMP SENSOR

DANGER

-          Any works on the vessel are unstable and risky. Installation /maintenance of transducer and water temp sensor should be handled after landing the vessel on ground or fixing the vessel at shipyard etc.

CAUTION

-          Be sure  to ventilate well inside the vessel when installing  the transducer at the bottom of vessel. Volatile gas from solvent etc. causes the toxic symptoms.

-          Water proof treatment is requires for Thru-Hull installation. If not, it causes the marine accident.

It is not allowed for aluminum vessels due to the risk of corrosion.

-          Do not operate the electronic tools with wet hands. It causes electronic shock.

-          Do not remove the transducer plug when the power is ON. It causes electronic shock.

4.       TFT LCD PANEL

-          TFT LCD panel is made with high precision technology. Therefore, the effective pixel is over 99%, and pixel loss and continuous lighting pixel exist 0.01% or more Please understand this specifications.

SPECIFICATIONS

STANDARD  CONFIGURATION

1.  Main Unit Bracket 1 pcs /Clamping Knop 2 pcs/ Rubber Washer 2pcs/ Bracket Washer 2pcs
2. Screws for Main Unit and Bracket 5x20 SUSx4 pcs
3. Screws for Buit-in Installation 4x30 SUSx4pcs
4. Power Supply Cable (DC06) 2P  2m
5. Disk Plate x2
6. Transducer Frequency /Output power are different for selected transducer

Operating Ma