ปั๊มจุ่มแบตเตอรี่ ZUZUMI Z-3000/ 24V

                                                    ปั๊มจุ่มแบตเตอรี่ ZUZUMI รุ่น Z-3000 /24V

SUBMERSIBLE   PUMP

MARINEPET

 Be sure to read this manual before operaeion

NOT

1. Don't run dry
2. Don't dip the end of the wire in the water
3. Be careful for the power voltage.

BL – 2524N, is for DC – 24V, BL2512N is for DC – 12 V. Don't mistake voltage, also connect white wire to + (plus), black wire to – ( minus). In case connecting another wire, use over 0.75 mm²

4. Don't pull the wire. Don't handle roughly. Don't drop the pump
5. In case of using the pump for discharging of Bilge water, the end of the delivery hose should be over the water surface. Otherwise by siphoning, the water will flow back into the bottom of the boat.
6. Can use in a little bit oil mixed water, but don't use in gasoline, kerosene, machines oil, and solvents.
7. Dust clogging in strainer is very often seen, this cause delivery volume decreasing. Please check the strainer occasionally.

CHARACTERISTICS

1. Large delivery volume, high delivery pressure  aimed the maximum of this class
2. Continuous running in the water in no problem. Unique motor cooling system enables continuous running
3. Double mechanical seal system equipped guarantees the complete shaft sealing
4. Using 304 Stainless, Saltwater-proof aluminum alloy, anti-shock PBT plastics assure long durability, perfect against saltwater corrosion
5. Small size, light, compact, easy to handle
6. Strainer can be quickly removed without tool, make it to clean inside
7. Wire and pump-connection part is strengthen by chain, this protects the grand part and prevent water leakage into motor room.

TROUBLE & REMEDY

How to take off the strainer cover:

  You can easily find 2 hooks around the strainer cover. Push these hooks inside, the strainer can by sliding.

SPECIFICATION

APPLICATION

1. Pumping out water from ice
2. Pumping fresh water in preserve
3. Discharging of Bilge water
4. Emergency pumping on the boat
5. Washing on the deck
6. Water exchanging in fish farm
7. For camping use
8. Car washing

 INSTALLATION

Install the pump body ( Strainer cover ) on the desired locations. Use 4-M4 x 12 screws to fix the body.

 SPECIFICATION

                                           ปั๊มจุ่มแบตเตอรี่ ZUZUMI รุ่น Z-3000 12V

SUBMERSIBLE   PUMP

MARINEPET

 Be sure to read this manual before operation

NOT

1. Don't run dry
2. Don't dip the end of the wire in the water
3. Be careful for the power voltage.

BL – 2524N, is for DC – 24V, BL2512N is for DC – 12 V. Don't mistake voltage, also connect white wire to + (plus), black wire to – ( minus). In case connecting another wire, use over 0.75 mm²

4. Don't pull the wire. Don't handle roughly. Don't drop the pump
5. In case of using the pump for discharging of Bilge water, the end of the delivery hose should be over the water surface. Otherwise by siphoning, the water will flow back into the bottom of the boat.
6. Can use in a little bit oil mixed water, but don't use in gasoline, kerosene, machines oil, and solvents.
7. Dust clogging in strainer is very often seen, this cause delivery volume decreasing. Please check the strainer occasionally.

CHARACTERISTICS

1. Large delivery volume, high delivery pressure  aimed the maximum of this class
2. Continuous running in the water in no problem. Unique motor cooling system enables continuous running
3. Double mechanical seal system equipped guarantees the complete shaft sealing
4. Using 304 Stainless, Saltwater-proof aluminum alloy, anti-shock PBT plastics assure long durability, perfect against saltwater corrosion
5. Small size, light, compact, easy to handle
6. Strainer can be quickly removed without tool, make it to clean inside
7. Wire and pump-connection part is strengthen by chain, this protects the grand part and prevent water leakage into motor room.

TROUBLE & REMEDY

How to take off the strainer cover:

  You can easily find 2 hooks around the strainer cover. Push these hooks inside, the strainer can by sliding.

SPECIFICATION

APPLICATION

1. Pumping out water from ice
2. Pumping fresh water in preserve
3. Discharging of Bilge water
4. Emergency pumping on the boat
5. Washing on the deck
6. Water exchanging in fish farm
7. For camping use
8. Car washing

INSTALLATION

Install the pump body ( Strainer cover ) on the desired locations. Use 4-M4 x 12 screws to fix the body.

SPECIFICATION

SUBMERSIBLE   PUMP

MARINEPET

 Be sure to read this manual before operation

NOT

8. Don't run dry
9. Don't dip the end of the wire in the water
10. Be careful for the power voltage.

BL – 2524N, is for DC – 24V, BL2512N is for DC – 12 V. Don't mistake voltage, also connect white wire to + (plus), black wire to – ( minus). In case connecting another wire, use over 0.75 mm²

11. Don't pull the wire. Don't handle roughly. Don't drop the pump
12. In case of using the pump for discharging of Bilge water, the end of the delivery hose should be over the water surface. Otherwise by siphoning, the water will flow back into the bottom of the boat.
13. Can use in a little bit oil mixed water, but don't use in gasoline, kerosene, machines oil, and solvents.
14. Dust clogging in strainer is very often seen, this cause delivery volume decreasing. Please check the strainer occasionally.

CHARACTERISTICS

8. Large delivery volume, high delivery pressure  aimed the maximum of this class
9. Continuous running in the water in no problem. Unique motor cooling system enables continuous running
10. Double mechanical seal system equipped guarantees the complete shaft sealing
11. Using 304 Stainless, Saltwater-proof aluminum alloy, anti-shock PBT plastics assure long durability, perfect against saltwater corrosion
12. Small size, light, compact, easy to handle
13. Strainer can be quickly removed without tool, make it to clean inside
14. Wire and pump-connection part is strengthen by chain, this protects the grand part and prevent water leakage into motor room.

TROUBLE & REMEDY

How to take off the strainer cover:

  You can easily find 2 hooks around the strainer cover. Push these hooks inside, the strainer can by sliding.

SPECIFICATION

APPLICATION

9. Pumping out water from ice
10. Pumping fresh water in preserve
11. Discharging of Bilge water
12. Emergency pumping on the boat
13. Washing on the deck
14. Water exchanging in fish farm
15. For camping use
16. Car washing

INSTALLATION

Install the pump body ( Strainer cover ) on the desired locations. Use 4-M4 x 12 screws to fix the body.

SPECIFICATION

 ปั๊มจุ่มแบตเตอรี่ ZUZUMI รุ่น Z-3000 12V

1. Don't run dry
2. Don't dip the end of the wire in the water
3. Be careful for the power voltage.

4. Don't pull the wire. Don't handle roughly. Don't drop the pump
5. In case of using the pump for discharging of Bilge water, the end of the delivery hose should be over the water surface. Otherwise by siphoning, the water will flow back into the bottom of the boat.
6. Can use in a little bit oil mixed water, but don't use in gasoline, kerosene, machines oil, and solvents.
7. Dust clogging in strainer is very often seen, this cause delivery volume decreasing. Please check the strainer occasionally.

1. Large delivery volume, high delivery pressure  aimed the maximum of this class
2. Continuous running in the water in no problem. Unique motor cooling system enables continuous running
3. Double mechanical seal system equipped guarantees the complete shaft sealing
4. Using 304 Stainless, Saltwater-proof aluminum alloy, anti-shock PBT plastics assure long durability, perfect against saltwater corrosion
5. Small size, light, compact, easy to handle
6. Strainer can be quickly removed without tool, make it to clean inside
7. Wire and pump-connection part is strengthen by chain, this protects the grand part and prevent water leakage into motor room.

1. Pumping out water from ice
2. Pumping fresh water in preserve
3. Discharging of Bilge water
4. Emergency pumping on the boat
5. Washing on the deck
6. Water exchanging in fish farm
7. For camping use
8. Car washing

8. Don't run dry
9. Don't dip the end of the wire in the water
10. Be careful for the power voltage.

11. Don't pull the wire. Don't handle roughly. Don't drop the pump
12. In case of using the pump for discharging of Bilge water, the end of the delivery hose should be over the water surface. Otherwise by siphoning, the water will flow back into the bottom of the boat.
13. Can use in a little bit oil mixed water, but don't use in gasoline, kerosene, machines oil, and solvents.
14. Dust clogging in strainer is very often seen, this cause delivery volume decreasing. Please check the strainer occasionally.

8. Large delivery volume, high delivery pressure  aimed the maximum of this class
9. Continuous running in the water in no problem. Unique motor cooling system enables continuous running
10. Double mechanical seal system equipped guarantees the complete shaft sealing
11. Using 304 Stainless, Saltwater-proof aluminum alloy, anti-shock PBT plastics assure long durability, perfect against saltwater corrosion
12. Small size, light, compact, easy to handle
13. Strainer can be quickly removed without tool, make it to clean inside
14. Wire and pump-connection part is strengthen by chain, this protects the grand part and prevent water leakage into motor room.

9. Pumping out water from ice
10. Pumping fresh water in preserve
11. Discharging of Bilge water
12. Emergency pumping on the boat
13. Washing on the deck
14. Water exchanging in fish farm
15. For camping use
16. Car washing